Welcome to the website of United Tech Industrial Group Co.,Ltd.
Position:Home > Solution

R Series Helical Gear Reducer

2024-04-11 16:47:00

Contact Information

Contact Information:      
Message Content:     

Introduction :
R Series Helical Gear Reducer for Hard Gear Surface Helical Gear Reducer, gear materials are all 20CrMnTi, after carburizing treatment, tooth surface hardness of 58-62HRC, grinding accuracy of up to 6 levels, to ensure the reliability of the reducer reducer and low noise. The main transmission parts of the reducer bearings are imported bearings, the seals are Taiwan's skeleton oil seal, the power is from 0.09KW-160KW, the output torque can reach 20N.M-14800N.M, the speed ratio can be from (with 4-pole motor) 1.6-264, can be divided into one stage transmission (transmission efficiency can reach 98%), Two-stage transmission (transmission efficiency up to 96%), three-stage transmission (transmission efficiency up to 94%); If equipped with 6 or 8 pole motor can obtain lower output speed; If you need a lower output speed can be used in the form of two-stage reducer, can obtain a lower output speed (more than 10,000 speed ratio). If the input is equipped with a continuously variable speed machine, the requirements of variable speed can be realized. Output forms are vertical and horizontal two, the output shaft is divided into solid shaft, hollow shaft (or non-standard production), can be installed in different directions and angles, can be used positive and negative. The reducer can be equipped with different types of motors (ordinary motors, single-phase motors, explosion-proof motors, variable frequency motors, brake motors, etc.). R series helical gear reducer is widely used in food and grain machinery, printing and packaging machinery, three-dimensional garage equipment, environmental protection machinery, conveying equipment, chemical equipment, metallurgical mining equipment, steel and power equipment, etc. (The market has used such products instead of cycloidal pin gear reducer to meet higher requirements)

Product Overview:
1, this series of reducer combined with international technical requirements of manufacturing, with high scientific and technological content;
2, hard gear reducer space saving, reliable and durable, high overload capacity, power up to 132KW;
3, low energy consumption, superior performance, reducer efficiency up to 95% or more;
4, low vibration, low noise, high energy saving;
5, R series helical gear hard gear reducer with high-quality forged steel material, steel cast iron box, gear surface through high-frequency heat treatment;
6, after precision machining, to ensure the shaft parallelism and positioning bearing requirements, the formation of helical gear transmission assembly reducer equipped with a variety of motor, combined into mechanical and electrical integration, fully ensure the quality characteristics of the reducer product use.

Performance characteristics:
1, small offset output, compact structure, maximize the use of box space, two, three in the same box.
2, the use of integral casting box, box structure stiffness is good, easy to improve the strength of the shaft and bearing life.
3, installation method: foot installation, flange installation size flange, easy to choose.
4, solid shaft output, the average efficiency is 96%, 94%, the average efficiency of R/R combination 85%.
5, specially designed for stirring RM series can bear large axial and radial forces.

Technical parameters:
Speed ratio range: R basic type 3.33 ~ 289.74, RX type 1.3 ~ 8.65, R/R combined type can reach 27001
Torque range: R basic type 85 ~ 18000 Nm, RX type 20 ~ 1680 Nm
Power range: R basic model 0.18 ~ 160 kW, RX model 0.18 ~ 132 kW
Structure form:
R: Shaft extension foot mounting RF: flange mounting
R… F: Foot flange installation RM

United Tech Industrial Group Co.,Ltd.    Technical Support:ZBOK